====== A20-cubietruck GPIO Pin ====== {{:products:a20_cubietruck:ct-pin脚图.png|}} ^ **CN8 (Near Ethernet connector)** ^^^^ ^ **2x15 Header** ^^^^ |30|LRADC1 |29|VCC-5V | |28|LRADC0 |27|CVBS | |26|LINEIN-R |25|PB19(TWI1-SDA) | |24|LINEIN-L |23|PB18(TWI1-SCK) | |22|PB4 (IR0-RX) |21|PB2 (PWM0) | |20|PB3 (IR0-TX)) |19|PI3 (PWM1) | |18|PI15 (PS2SDA1/EINT27) |17|PI21 (FMIN-R/PS2SDA0/UART7-RX/HSDA) | |16|PI14 (PS2SCLK1/EINT26) |15|PI20 (FMIN-L/PS2SCLK0/UART7-TX/HSCL)| |14|GND |13|GND | |12|PB17 (SPI2-MISO/JTAG_DI0) |11|PB15(SPI2-CLK/JTAG_CK0) | |10|PB16 (SPI2-MOSI/JTAG_DO0) |9|PB14 (SPI2-CS0/JTAG_MS0) | |8|PC22 (SPI2-MISO/EINT15) |7|PC20 (SPI2-CLK) | |6|PC21 (SPI2-MOSI/EINT14) |5|PC19 (SPI2-CS0) | |4|RESET# |3|AVCC | |2|3.3V |1|GND | ^ **CN9 (Near USB Ports)** ^^^^ ^ **CSI1/TS/TP/TVIN** ^^^^ |1|3.3V |2|3.3V | |3|PG0 (TS1_CLK/CSI1-PCLK) |4|PG3 (TS1_ERR/CSI1-VSYNC) | |5|PG2 (TS1_SYNC/CSI1-HSYNC) |6|PG1 (TS1_DVLD/CSI1-MCLK) | |7|PG4 (TS1_D0/CSI1-D0) |8|PG5 (TS1_D1/CSI1-D1) | |9|PG6 (TS1_D2/CSI1-D2/UART3-TX) |10|PG7 (TS1_D3/CSI1-D3/UART3-RX) | |11|PG8 (TS1_D4/CSI1-D4/UART3-RTS)|12|PG9 (TS1_D5/CSI1-D5/UART3-CTS) | |13|PG10 (TS1_D6/CSI1-D6/UART4-TX)|14|PG11 (TS1_D7/CSI1-D7/UART4-RX) | |15|GND |16|GND | ^ **Analog** ^^^^ |17|XP-I2SDO1 |18|TVIN0-I2SMCLK | |19|XN-I2SDO2 |20|TVIN1-BTPCMCLK | |21|YP-I2SDO3 |22|TVIN2-BTPCMSYNC | |23|XN-BTPCMIN |24|TVIN3-BTPCMOUT | {{tag>Cubieboard Cubietruck}}