====== A20-cubieboard Lubuntu Desktop Releases ======

<WRAP noprint><WRAP left box 60%>
//__About this Article__//
  * **Author**: james --- james@cubietech.com --- 2013/10/23 14:31
  * **Copyrights**: [[http://creativecommons.org/licenses/by-sa/3.0/|CC Attribution-Share Alike 3.0 Unported]]
  * **Contributors**: [[http://cubieboard.org/|Cubieboard Community]] : ...
</WRAP></WRAP>



======v1.04======
|< 80% 120px 200px >|
^Download^Features^Issues^Note^
|[[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-1204-v1.04.img|Img]]|Based on v1.04-beta1 |MALI GPU not support till now|login/password: linaro/linaro|
|\\ \\  [[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/linux-sunxi-kernel-cb2-lubuntu-v1.04.tgz| Kernel]]|Add jdk-1.8 armhf|VE not support till now|:::|
|:::|with many USB camera drivers builtin|Cannot auto switch to VGA output|:::|
|:::| Support PWM|First time boot take about 2 minutes to setup|:::|
|:::| fex2bin/bin2fex tools and cb-display-tool|Take a long time to boot when no wired net \\ cable Wait DHCP timeout|:::|

To use pwm:
<code >
$ cd /lib/modules/`uname -r`/kernel/drivers/misc
$ sudo insmod pwm-sunxi.ko
$ sudo su - root
# cd /sys/kernel/sunxi_pwm
# echo '0 1200 2400' > start
</code>

To use cb-display-tool:
<code >
# To switch VGA/HDMI display mode in command line. e.g.
$ cb-display-tool -o 8 -m 11
# Note: can switch to the same resolutions only currently.
</code>

======v1.05======
|< 80% 120px 200px >|
^Download^Features^Issues^Note^
|[[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.05.img.gz|Img.gz]]|Enable MALI GPU|2D, Video Encoding/Decoding|login/password: linaro/linaro|
|[[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.05-kernelsource.tar.gz|Kernelsource]]|Enable many kernel modules that users want|SPI doesn't work|:::|

======v1.06======
|< 80% 120px 200px >|
^Download  ^ Features ^ Issues ^Note^
| \\ \\ [[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.06/cb2-lubuntu-desktop-20131026/lubuntu-desktop-nand.img.gz|Img]]| 1.Enable Cedarx \\ 2.Put uImage, uEnv.txt to first nand partition, so we can change kernel, parameters more easily \\ 3.Reduce nand partitions from 5 to 3|1. SPI driver doesn't  work currently|login/password: linaro/linaro|
|:::|:::|:::|:::|
|:::|:::|:::|:::|
|[[http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.06/cb2-lubuntu-desktop-20131026/kernel-source.tar.gz|Kernel]]|:::|:::|:::|

<note tip>For SD Card Installation, please refer to [[http://docs.cubieboard.org/tutorials/cb2/installation/cb2_lubuntu_card_install|here]]</note>

 











































<WRAP noprint>
{{tag>Cubieboard Cubietruck}}
</WRAP>