====== Connecting ======

<WRAP noprint><WRAP left box 60%>
//__About this Article__//
  * **Author**: sam --- sam@cubietech.com --- 2014/02/25 16:10
  * **Copyrights**: [[http://creativecommons.org/licenses/by-sa/3.0/|CC Attribution-Share Alike 3.0 Unported]]
  * **Contributors**: [[http://cubieboard.org/|Cubieboard Community]] : ...
</WRAP></WRAP>

===== Abstract =====
1. Installing a firmware in cubieboard. you can refer to this:

for cb1:it is spceial,you must use SD bootable lubuntu [[http://docs.cubieboard.org/tutorials/cb1/installation/cb1_lubuntu_card_install|Cubieboard1: Install SD bootable lubuntu]]

for cb2:[[http://docs.cubieboard.org/tutorials/cb2/installation/cb2_lubuntu_nand_install|A20-Cubieboard: Install Nand bootable lubuntu]]

for ct:[[http://docs.cubieboard.org/tutorials/ct1/installation/cb3_lubuntu-12.10-desktop_nand_installation_v1.00|Lubuntu-12.10-Desktop Nand Installation Guide(v1.00) ]]

2. Use usb to connect cubieboard and usb

{{:tutorials:arduino:连接.jpeg?1000|}}

3. Installing the software Arduino ide for writing programm in cubieboard.

   $sudo apt-get update
   $sudo apt-get install arduino 
   
4.  Click the programmin and  you can find the software arduino IDE

{{:tutorials:arduino:img_20140225_165950.jpg?1000|}}

5.  And you can use this software to write programming

{{:tutorials:arduino:img_20140225_160808.jpg?1000|}}
====== Online Lab ======
  * [[tutorials:arduino:Controlling Led|Controlling Led]]