====== Cb3 A20-install Nand Boot Android For Cubietruck ======

<WRAP noprint><WRAP left box 60%>
//__About this Article__//
  * **Author**: james --- james@cubietech.com --- 2013/10/22 14:15
  * **Copyrights**: [[http://creativecommons.org/licenses/by-sa/3.0/|CC Attribution-Share Alike 3.0 Unported]]
  * **Contributors**: [[http://cubieboard.org/|Cubieboard Community]] : ...
</WRAP></WRAP>

===== Install Livesuit or PhoenixSuit =====
All sunxi devices use LiveSuit as a default flasher and updater for retail customer and PhoenixCard or PhoenixUSB for flashing when devices are manufactured. LiveSuit/Phoenix protocol and data are closed-source standrad used by many companies and devices.

Please note that PhoenixSuit is actually LiveSuit2.0. There are different platform's PhoenixSuit
  - Windows
  - Linux i386
  - Linux x86_64
  - Mac

Please refer to the [[tutorials:common:Livesuit Installation Guide|Livesuit/PhoenixSuit Installation Guide]]

===== Download Image =====

Assuming you are going to use ct-nand-v1.01-20140109.img
 <code>
 $wget http://dl.cubieboard.org/software/a20-cubietruck/android/ct-nand-v1.01-20140109.img.gz
 $gunzip  ct-nand-v1.01-20140109.img.gz
 </code>

<note tip>The latest version is [[http://dl.cubieboard.org/software/a20-cubietruck/android/ct-nand-v1.01-20140214.img.tar.gz|v1.01-20140214]]. Please to use this one.</note>

For more Livesuit Images, please refer to http://dl.cubieboard.org
If you want to know more about what is a LiveSuit Image, please refer to http://linux-sunxi.org/LiveSuite_images

(We just have only one image for cubietruck,later we will have more image)

===== Run Livesuit =====
Run Livesuit

{{:tutorials:ct1:installation:lubuntu-livesuit.png|}}

select the image 

{{:tutorials:ct1:installation:selection_050.png|}}

Press the FEL key when power up(the FEL key is the one under the USB OTG port), The CPU automatically enters FEL mode. Livesuit will start to write the image to Nand on board.

Press "Yes":

{{:tutorials:ct1:installation:selection_053.png|}}

Installing:

{{:tutorials:ct1:installation:selection_052.png|}}

Install Success:

{{:tutorials:ct1:installation:selection_054.png|}}
<WRAP noprint>
{{tag>Cubieboard Cubietruck}}
</WRAP>