• http://ubuntuone.com/0tRcRMM8MsoHMJ2onL9YNI

• Suport Livesuit(Windows:ok; Linux: not supported; Mac: not tested)
• Default HDMI output
• Linux-3.3 Kernel

• Do not support Linux Livesuit
• X windows does not display correctly sometimes

• http://ubuntuone.com/5SnwaG2DrsihQfpjQu9JPd (HDMI)
• http://ubuntuone.com/56srFr1jOaLMd7Jf1wn6tp (VGA)

• Suport Livesuit(Windows:not supported; Linux: yes; Mac: not tested)
• Support HDMI/VGA output

• Do not support Windows Livesuit
• X windows does not display correctly sometimes

• http://ubuntuone.com/3BhoQdUSDrPlFbqdisgCTq

• Linux 3.4 kernel
• Default HDMI output
• Preinstall openssh-server/openssh-client
• Preinstall fbset

#to tune screen display
 $fbset -left 10

• Preinstall GPIO python library
• Preinstall Chinese font
• RTL8188EU/RTL8192CU wifi have been tested
• Enable DHCP eth0
• DRAM 480MHz
• Support Linux/Windows Livesuit(MAC Tested: Works)

• Take a long time to boot when no wired net cable

Wait DHCP timeout

• MALI GPU not support till now
• VE not support till now
• Cannot auto switch to VGA output
• First time boot take about 2 minutes to setup
• Early A20 chip have no CHIPID, the new will have chipid that can be used as MAC address

• http://ubuntuone.com/69ifBXGgwj4rBQoDsmKB63

Most features is same as v1.04-beta1, the changes are:

• Add fex2bin/bin2fex tools
• Add cb-display-tool

 To switch VGA/HDMI display mode in command line. e.g.
 $cb-display-tool -o 8 -m 11
 Note: can switch to the same resolutions only currently.

• Add jdk-1.8 armhf
• with many USB camera drivers builtin
• Support PWM

 To use pwm:
 $cd /lib/modules/`uname -r`/kernel/drivers/misc
 $sudo insmod pwm-sunxi.ko
 $sudo su - root
 #cd /sys/kernel/sunxi_pwm
 #echo '0 1200 2400' > start

• http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/linux-sunxi-kernel-cb2-lubuntu-v1.04.tgz

• Take a long time to boot when no wired net cable

Wait DHCP timeout

• MALI GPU not support till now
• VE not support till now
• Cannot auto switch to VGA output
• First time boot take about 2 minutes to setup
• Early A20 chip have no CHIPID, the new will have chipid that can be used as MAC address

• http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.05.img.gz

• Enable MALI GPU
• Enable many kernel modules that users want

• http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-12.10-v1.05-kernelsource.tar.gz

• 2D, Video Encoding/Decoding, SPI doesn't work (2D, VE already works on latest kernel)

• http://dl.cubieboard.org/software/a20-cubieboard/lubuntu/cb-a20-lubuntu-server-13.06-v1.00.img.gz

• Enable MALI GPU
• Enable many kernel modules that users want
• Use linaro lubuntu 13.06 rootfs

1. A20-Cubieboard: Install Nand bootable lubuntu
2. A20-Cubieboard: Install SD bootable lubuntu

• Change boot params for Nand images
• Switching to VGA runtime
• Programming with Cubies
• Strimming your screen
• Enable Line-In
• Playing videos
• Setting up 2D/3D acceleration in X
• Hacking with sunxi-tools