This shows you the differences between two versions of the page.
products:start [2015/02/27 14:41] aaron |
products:start [2017/06/21 05:36] (current) admin [Cubietruck(Cubieboard3)] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Cubieboard Open-Source Main-Boards====== | + | ====== CubieBoard Open-Source Hardware====== |
- | ===== Cubieboard1 ===== | ||
- | Cubieboard1 is a small (10x6cm), hacker friendly, extendable, very low-cost, and powerful ARM board with Allwinner A10 SoC. It features a 1 GHz ARM Cortex A8 CPU, with 1GB of DDR3 RAM, a very powerful Video Encoding/Decoding VPU, a Mali400 OpenGL ES GPU, and 96 expansion headers which can be used as GPIO, I2C, UART, LVDS, PWM, SPI, CSI, and so on. | + | ===== CubieBoard6 ===== |
- | {{:cubieboard.jpg?550|a10-cubieboard}} | + | ===== CubieBoard5/CubieTruck Plus ===== |
+ | |||
+ | |||
+ | |||
+ | ===== CubieBoard4/CC-A80 ===== | ||
+ | |||
+ | The new architecture Cubieboard based on Allwinner A80 . | ||
+ | |||
+ | {{:products:cubieboard4-cca80.jpg?550|Cubieboard4}} | ||
==== Hardware Specs ==== | ==== Hardware Specs ==== | ||
+ | - SOC | ||
+ | - Allwinner A80 ,Octa-Core Big-Little A15/A7,28nm | ||
+ | - CPU :ARM Cortex A15x4 up to 2.0GHz,A7x4 up to 1.3GHz | ||
+ | - GPU : PowerVR 64-core G6230 | ||
+ | - Memory: 2GB ,64bit,dual channel,1600MTPS | ||
+ | - Storage : EMMC ,up to 64GB,default 8GB ,write/read speed 25MB/s | ||
+ | - TF-Card : Micro SD Card | ||
+ | - USB : USB2.0 hostx4 ,USB3.0 OTGx1 | ||
+ | - Display | ||
+ | - HDMI Port A ,HDMI V1.4a | ||
+ | - VGA support 1080P resolution output | ||
+ | - Ethernet: 10M/100M/1000M NIC | ||
+ | - Wireless: | ||
+ | - WIFI :2.4G/5.8G,dual band ,300Mbps with external antenna | ||
+ | - BT : BT4.0+EDR | ||
+ | - IR : IR receiver Philips standard | ||
+ | - RTC : Support 1220 size rechargeable button cell | ||
+ | - Audio : Support 3.5 Headphone and Microphone | ||
+ | - Power : | ||
+ | - DCIN 5V@4A Power | ||
+ | - Support USB 3.0 Jack Power | ||
+ | - Support 3.7V Li-Po battery | ||
+ | - Keys : Power Key ,Reset Key ,Reboot Key | ||
+ | - Leds : Power Led x1 ,User Led x2 | ||
+ | - Expansion Pins : UART x3 ,I2C x3 ,JTAG ,5V and 3V Power | ||
- | - AllWinnerTech SOC A10,ARM® Cortex™-A8 ARM® Mali400 MP1 Complies with OpenGL ES 2.0/1.1 | + | ==== Expansion Ports ==== |
- | - 1GB DDR3 @480MHz | + | * [[http://dl.cubieboard.org/model/cc-a80/Hardware/CC-A80-J20-PIN.pdf|Expansion Ports Introduction]] |
- | - 4GB internal NAND flash, up to 32GB on SD slot, up to 2T on 2.5 SATA disk | + | |
- | - 5VDC input 2A or USB otg input | + | ===== CubieBoard3/CubieTruck ===== |
- | - 1x 10/100 ethernet, support usb wifi | + | |
- | - 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd | + | While cubieboard1/2 very suitable for student, software/hardware hackers, cubietruck(cubieboard3) is suitable for us to make real product. |
- | - 1x HDMI 1080P display output | + | |
- | - 1x IR, 1x line in, 1x line out | + | ==== Software Support ==== |
- | - 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more | + | |
+ | |||
+ | For more software support,please visit [[http://docs.cubieboard.org/tutorials/cc-a80/start|here]] | ||
+ | |||
+ | |||
+ | {{:a20-cubietruck.png?550|cubietruck}} | ||
+ | |||
+ | Cubietruck is the 3rd board of Cubieteam, so we also name it Cubieboard3. It's a new PCB model adopted with Allwinner A20 main chip,just like Cubieboard2. But it is enhanced with some features, such as 2GB memory, VGA display interface on-board, 1000M nic, WIFI+BT on-board, support Li-battery and RTC,SPDIF audio interface. | ||
+ | |||
+ | |||
+ | ==== Hardware Specs ==== | ||
+ | |||
+ | - AllWinnerTech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1 | ||
+ | - 1GB/2GB DDR3@480MHz | ||
+ | - HDMI&VGA 1080P display output on-board | ||
+ | - 10M/100M/1G Ethernet | ||
+ | - Wifi+BT wireless connection with antenna on-board | ||
+ | - SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input) | ||
+ | - Storage solution NAND+MicroSD or TSD+ MicroSD or 2*MicroSD | ||
+ | - 2 x USB HOST 1 x OTG 1 x SPDIF 1 x IR 4 x LEDs 1 Headphone 3 x Keys | ||
+ | - Power DC5V @ 2.5A with HDD support Li-battery & RTC | ||
+ | - 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWMx2, TS/CSI, IRDA, LINEIN&FMIN, TVINx4 with 2.0 pitch connectors | ||
+ | - PCB size 11cm *8cm*1.4mm very suitable for installing a 2.5’ HDD | ||
==== Expansion Ports ==== | ==== Expansion Ports ==== | ||
+ | * [[:A20-Cubietruck GPIO Pin|Expansion Ports Introduction]] | ||
- | * [[:products:a10_cubieboard:expansion_ports|Expansion Ports Introduction]] | ||
- | ===== Cubieboard2 ===== | + | ===== CubieBoard2 ===== |
- | After about half year of cubieboard1's born, cubietech brought an another board, cubieboard2 to the cubie fans, which is totally compatible with cubieboard1. | + | After about half year of cubieboard1's release, CubieTech brought another board, CubieBoard2 to the Cubie fans, which is totally compatible with CubieBoard1. It shares the same PCB with CubieBoard1, but with a Dual-Core CPU and a Dual-Core Mali400 GPU. |
- | It share the same PCB with cubieboard1, but with a dual core CPU and a dual core MALI400 GPU. | + | |
{{:a20-cubieboard.png?550|cubieboard2}} | {{:a20-cubieboard.png?550|cubieboard2}} | ||
Line 68: | Line 121: | ||
For more software information, please refer to here: | For more software information, please refer to here: | ||
http://docs.cubieboard.org/tutorials/cb2 | http://docs.cubieboard.org/tutorials/cb2 | ||
- | ===== Cubietruck(Cubieboard3) ===== | ||
- | While cubieboard1/2 very suitable for student, software/hardware hackers, cubietruck(cubieboard3) is suitable for us to make real product. | ||
- | {{:a20-cubietruck.png?550|cubietruck}} | ||
- | Cubietruck is the 3rd board of Cubieteam, so we also name it Cubieboard3. It's a new PCB model adopted with Allwinner A20 main chip,just like Cubieboard2. But it is enhanced with some features, such as 2GB memory, VGA display interface on-board, 1000M nic, WIFI+BT on-board, support Li-battery and RTC,SPDIF audio interface. | ||
+ | ===== CubieBoard1 ===== | ||
- | ==== Hardware Specs ==== | + | CubieBoard1 is a small (10x6cm), hacker friendly, extendable, very low-cost, and powerful ARM board with Allwinner A10 SoC. It features a 1 GHz ARM Cortex A8 CPU, with 1GB of DDR3 RAM, a very powerful Video Encoding/Decoding VPU, a Mali400 OpenGL ES GPU, and 96 expansion pin headers which can be used as GPIO, I2C, UART, LVDS, PWM, SPI, CSI, and so on. |
- | - AllWinnerTech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1 | ||
- | - 1GB/2GB DDR3@480MHz | ||
- | - HDMI&VGA 1080P display output on-board | ||
- | - 10M/100M/1G Ethernet | ||
- | - Wifi+BT wireless connection with antenna on-board | ||
- | - SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input) | ||
- | - Storage solution NAND+MicroSD or TSD+ MicroSD or 2*MicroSD | ||
- | - 2 x USB HOST 1 x OTG 1 x SPDIF 1 x IR 4 x LEDs 1 Headphone 3 x Keys | ||
- | - Power DC5V @ 2.5A with HDD support Li-battery & RTC | ||
- | - 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWMx2, TS/CSI, IRDA, LINEIN&FMIN, TVINx4 with 2.0 pitch connectors | ||
- | - PCB size 11cm *8cm*1.4mm very suitable for installing a 2.5’ HDD | ||
- | ==== Expansion Ports ==== | + | {{:cubieboard.jpg?550|a10-cubieboard}} |
- | * [[:A20-Cubietruck GPIO Pin|Expansion Ports Introduction]] | + | |
- | ===== Cubieboard4(CC-A80) ===== | + | ==== Hardware Specs ==== |
- | {{:products:cubieboard4-cca80.jpg?550|Cubieboard4}} | + | - AllWinnerTech SOC A10,ARM® Cortex™-A8 ARM® Mali400 MP1 Complies with OpenGL ES 2.0/1.1 |
+ | - 1GB DDR3 @480MHz | ||
+ | - 4GB internal NAND flash, up to 32GB on SD slot, up to 2T on 2.5 SATA disk | ||
+ | - 5VDC input 2A or USB otg input | ||
+ | - 1x 10/100 ethernet, support usb wifi | ||
+ | - 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd | ||
+ | - 1x HDMI 1080P display output | ||
+ | - 1x IR, 1x line in, 1x line out | ||
+ | - 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more | ||
- | Cubieboard4,also called CC-A80 ,is the fourth generation cubieboard,this is cubieboard4 features. | + | ==== Expansion Ports ==== |
- | + | ||
- | {{:products:cb4-features.png?550|cubiebaord4 features}} | + | |
- | + | ||
- | For more software support,please visit [[http://docs.cubieboard.org/tutorials/cc-a80/start|here]] | + | |
+ | * [[:products:a10_cubieboard:expansion_ports|Expansion Ports Introduction]] | ||