CubieBoard Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Building & Install Android ICS(A10) Image ======

<WRAP noprint><WRAP left box 60%>
//__About this Article__//
  * **Author**: james --- james@cubietech.com --- 2013/10/17 11:06
  * **Copyrights**: [[http://creativecommons.org/licenses/by-sa/3.0/|CC Attribution-Share Alike 3.0 Unported]]
  * **Contributors**: [[http://cubieboard.org/|Cubieboard Community]] : ...
</WRAP></WRAP>





===== Download the source code =====
Before all you should make sure that you have more than 23GB space

  $mkdir a10-android-ICS && cd a10-android-ICS
  $wget http://dl.cubieboard.org/software/a10-cubieboard/android/A10-android-4.04.tar.xz
  $tar -xvJf A10-android-4.04.tar.xz
===== Compiling image=====
After get the source code,you could use common to build it as follow:

====Build Linux kernal====

  $cd lichee/
  $./build.sh -p sun4i_crane -k 3.0

Start building:

{{:tutorials:cb1:installation:selection_041.png|}}

Sucess building:

{{:tutorials:cb1:installation:selection_042.png|}}

====Build Android image====

  $cd ../android
  $source build/envsetup.sh
  $lunch 11 (select apollo_cubieboard-eng)
  $extract-bsp
  $make -j8
Finish building:

{{:tutorials:cb1:installation:selection_043.png|}}

Pack Final image:

  $pack

Pack success:

{{:tutorials:cb1:installation:selection_044.png|}}

=====Install image=====  
The final image is at lichee/lichee/tools/pack/sun4i_crane_cubieboard.img


=====Setup=====
It is recommended to run this on Ubuntu 12.04 setup. You will need 'make' version 3.81 specifically.


<WRAP noprint>
{{tag>Cubieboard Cubietruck}}
</WRAP>

CubieBoard Docs

User Tools

Site Tools

Page Tools