CubieBoard Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Prerequisites ======
===== Install Livesuit or PhoenixSuit =====
All sunxi devices use LiveSuit as a default flasher and updater for retail customer and PhoenixCard or PhoenixUSB for flashing when devices are manufactured. LiveSuit/Phoenix protocol and data are closed-source standrad used by many companies and devices.

Please note that PhoenixSuit is actually LiveSuit2.0. There are different platform's PhoenixSuit
  - Windows
  - Linux i386
  - Linux x86_64
  - Mac

Please refer to the [[:tutorials:common:Livesuit Installation Guide|Livesuit/PhoenixSuit Installation Guide]]

====== Installation Steps ======

===== Download Image =====

Assuming you are going to use cubiebox_tvbox_rel2.2
 <code>
 $wget http://dl.cubieboard.org/software/a10-cubieboard/android/cubiebox_tvbox_rel2.2.img
 </code>

For more Livesuit Images, please refer to http://dl.cubieboard.org
If you want to know more about what is a LiveSuit Image, please refer to http://linux-sunxi.org/LiveSuite_images

===== Run Livesuit =====
Run Livesuit 

{{ :tutorials:cb1:installation:1.png?direct |}}

select the image 

{{ :tutorials:cb1:installation:22222.png?direct |}}


===== Enter FEL Mode=====
Press the FEL key when power up(the FEL key is the one under the USB OTG port), The CPU automatically enters FEL mode. Livesuit will start to write the image to Nand on board.

CubieBoard Docs

User Tools

Site Tools

Page Tools