This shows you the differences between two versions of the page.
tutorials:cb2:installation:cb2_fedora_19_card_install [2013/09/26 11:30] soloforce created |
tutorials:cb2:installation:cb2_fedora_19_card_install [2013/12/23 14:50] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
===Quickstart guide=== | ===Quickstart guide=== | ||
- | - Download the img file from [[http://dl.cubieboard.org/software/a20-cubieboard/fedora/Fedora-19-a10-armhfp-r2.img.xz|Fedora-19-a10-armhfp-r2.img.xz]] | + | - Download the img file from [[http://dl.cubieboard.org/software/a20-cubieboard/fedora/Fedora-19-a10-armhfp-r3.img.xz|Fedora-19-a10-armhfp-r3.img.xz]] |
- Insert an 8G SD card, note any data on the card will be destroyed! Note:some SD cards are not suite for the img ,maybe appear printed some wrong , so you have to change an other card . | - Insert an 8G SD card, note any data on the card will be destroyed! Note:some SD cards are not suite for the img ,maybe appear printed some wrong , so you have to change an other card . | ||
- Make sure the card is not mounted, run “mount” and if the card shows up in the output umount its partitions | - Make sure the card is not mounted, run “mount” and if the card shows up in the output umount its partitions | ||
- Write the img file to the card, ie as root do:<code> | - Write the img file to the card, ie as root do:<code> | ||
- | xzcat Fedora-19-a10-armhfp-r2.img.xz > /dev/XXX | + | xzcat Fedora-19-a10-armhfp-r3.img.xz > /dev/XXX |
sync | sync | ||
</code> | </code> | ||
- Remove the card, and re-insert it. The uboot partition should get automatically mounted. | - Remove the card, and re-insert it. The uboot partition should get automatically mounted. | ||
- As root (or through sudo) run: <uboot-part-mount>/select-board.sh, for A20 ie:<code> | - As root (or through sudo) run: <uboot-part-mount>/select-board.sh, for A20 ie:<code> | ||
- | sudo /XXX/uboot/select-board.sh cubiebaord2 | + | sudo /XXX/uboot/select-board.sh cubieboard2 |
</code> | </code> | ||
- umount the uboot and rootfs partitions, ie:<code> | - umount the uboot and rootfs partitions, ie:<code> |