This shows you the differences between two versions of the page.
tutorials:cb2 [2014/08/19 18:02] aaron |
tutorials:cb2 [2014/10/08 10:34] (current) aaron |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Cb2-2card cubieez ====== | + | ====== Cubieboard2 Dual-card docs ====== |
<WRAP noprint><WRAP left box 60%> | <WRAP noprint><WRAP left box 60%> | ||
Line 13: | Line 13: | ||
======= Hardware ======= | ======= Hardware ======= | ||
{{:tutorials:cb2-2cards:205717m3apxxbv8k36aobx.png?600|}} | {{:tutorials:cb2-2cards:205717m3apxxbv8k36aobx.png?600|}} | ||
+ | |||
+ | For more hardware photoes, please visit this link: | ||
+ | https://www.flickr.com/photos/125001602@N03/sets/72157646135453057/ | ||
+ | |||
======= Software ======= | ======= Software ======= | ||
- | ====== Cubieez ====== | + | ===== Distribution ===== |
- | {{:tutorials:cb2-2cards:cubieez-0814.png?600|}} | + | [[tutorials:cb2-2cards:start|Cubieez]] |
- | ===== Abstract ===== | + | |
- | Cubieez is based on Debian, which rootfs is created by drkbcn from cubieforums. | + | |
- | * Performance CPU governor | + | |
- | * Kernel 3.4.79 with ARMHF support | + | |
- | * Based on Debian 7.5 Wheezy | + | |
- | * Kernel support to major USB Wi-Fi adapters(8188eu&8192cu) | + | |
- | * Debian 7.5 ARMHF repository (better than Ubuntu one) | + | |
- | * LXDE base desktop with low mem consumption | + | |
- | * audio CODEC (jack audio) and sunhdmi (HDMI audio) | + | |
- | * DATA-card(card1) activity to green led | + | |
- | * X11VNC, SSH (SFTP too) and other basic utils installed | + | |
- | * Iceweasel browser | + | |
- | * Gnome Mplayer (less CPU consumption than lxmusic) | + | |
- | * Eable OTG device fuction (g_mass_storage) | + | |
- | * Expanding all tf-card space to rootfs when first booting | + | |
- | ===== Installation ===== | + | |
- | ==== Hardware ==== | + | |
- | * cb2-2cards | + | |
- | * card-reader | + | |
- | * TF card (>=2G,class 10 suggeted) | + | |
- | * HDMI and Monitor | + | |
- | * USB mouse and keyboard | + | |
- | === More === | + | |
- | * SATA | + | |
- | * Data tf card | + | |
- | * USB to miniUSB tieline | + | |
- | ==== Get image ==== | + | |
- | - Get newest image [[http://dl.cubieboard.org/software/cb2-2cards/debian/image/cubieez-cb2-2cards-v2.0-20140812/cubieez-cb2-2cards-v2.0-20140812.tar.gz|cubieez-2.0]] | + | |
- | - Get origin md5sum to check you image is completed | + | |
- | <code> | + | |
- | $ md5sum cubieez-cb2-2cards-v2.0-20140812.tar.gz > my_md5sum | + | |
- | $ cat my_md5sum | + | |
- | Compared with origin md5sum:dbb974882aa352dbcf3201ff8bfef676 | + | |
- | </code> | + | |
- | |||
- | ==== Write to card ==== | ||
- | * For linux users : | ||
- | <code> | ||
- | $ sudo tar -zxvf cubieez-cb2-2cards-v2.0-20140812.tar.gz | ||
- | $ sudo umount /dev/sdx //sdx is your tf-card device label ,example sdb | ||
- | $ sudo dd if=cubieez-cb2-2cards-v2.0-20140812.img of=/dev/sdx | ||
- | $ sudo sync | ||
- | </code> | ||
- | <note>"dd" is a dangerous operation,make sure sdx is your tfcard </note> | ||
- | * For windows users:using [[http://dl.cubieboard.org/software/tools/windows/win32diskimager-v0.7-binary.zip|win32diskimager]] write image to card. | ||
- | ==== Booting ==== | ||
- | - Insert boot card to** card2 slot** (bootcard) | ||
- | - Connecting board and monitor by HDMI | ||
- | - Insert network cable | ||
- | - Power on | ||
- | <note> First booting ,the system will reboot once to expand rootfs </note> | ||
- | ==== passwd ==== | ||
- | user:**cubie** passwd:**cubieboard** | ||
- | ==== test ==== | ||
- | {{:tutorials:cb2-2cards:summary.png?600|}} | ||
- | === Modules === | ||
- | <code> | ||
- | cubie@cubie:~$ lsmod | ||
- | Module Size Used by | ||
- | disp_ump 861 0 | ||
- | g_mass_storage 43206 0 | ||
- | sunxi_cedar_mod 9962 0 | ||
- | mali_drm 2608 1 | ||
- | drm 195017 2 mali_drm | ||
- | lcd 3638 0 | ||
- | mali 111536 0 | ||
- | ump 51204 4 mali,disp_ump | ||
- | </code> | ||
- | |||
- | === Network === | ||
- | == Cable network == | ||
- | <code> | ||
- | root@cubie:/# ifconfig | ||
- | eth0 Link encap:Ethernet HWaddr 02:d5:09:40:b0:4f | ||
- | inet addr:**192.168.1.110** Bcast:192.168.1.255 Mask:255.255.255.0 | ||
- | inet6 addr: fe80::d5:9ff:fe40:b04f/64 Scope:Link | ||
- | UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 | ||
- | RX packets:17604 errors:0 dropped:0 overruns:0 frame:0 | ||
- | TX packets:117 errors:0 dropped:0 overruns:0 carrier:0 | ||
- | collisions:0 txqueuelen:1000 | ||
- | RX bytes:4331986 (4.1 MiB) TX bytes:10515 (10.2 KiB) | ||
- | Interrupt:87 Base address:0xa000 | ||
- | |||
- | lo Link encap:Local Loopback | ||
- | inet addr:127.0.0.1 Mask:255.0.0.0 | ||
- | inet6 addr: ::1/128 Scope:Host | ||
- | UP LOOPBACK RUNNING MTU:16436 Metric:1 | ||
- | RX packets:4 errors:0 dropped:0 overruns:0 frame:0 | ||
- | TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 | ||
- | collisions:0 txqueuelen:0 | ||
- | RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) | ||
- | |||
- | root@cubie:/# ping cubieboard.org | ||
- | PING cubieboard.org (192.163.232.151) 56(84) bytes of data. | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=1 ttl=51 time=283 ms | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=2 ttl=51 time=283 ms | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=3 ttl=51 time=284 ms | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=4 ttl=51 time=284 ms | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=5 ttl=51 time=284 ms | ||
- | 64 bytes from 192-163-232-151.unifiedlayer.com (192.163.232.151): icmp_req=6 ttl=51 time=283 ms | ||
- | </code> | ||
- | == USB WIFI == | ||
- | cb2-2cards can support 8188eu ,when you insert wifi dongle,cubieez will modprobe 8188eu auto. | ||
- | - You can config wifi in cubieez desktop.{{:tutorials:cb2-2cards:wifi.png|}} | ||
- | - Restart networking | ||
- | <code> | ||
- | $ sudo /etc/init.d/networking restart | ||
- | </code> | ||
- | |||
- | |||
- | === Rootfs space === | ||
- | <code> | ||
- | root@cubie:/# df -h | ||
- | Filesystem Size Used Avail Use% Mounted on | ||
- | rootfs 7.3G 1.5G 5.6G 21% / | ||
- | /dev/root 7.3G 1.5G 5.6G 21% / | ||
- | devtmpfs 382M 0 382M 0% /dev | ||
- | tmpfs 96M 548K 95M 1% /run | ||
- | tmpfs 5.0M 0 5.0M 0% /run/lock | ||
- | tmpfs 191M 68K 191M 1% /run/shm | ||
- | tmpfs 478M 24K 478M 1% /tmp | ||
- | tmpfs 478M 0 478M 0% /var/tmp | ||
- | /dev/mmcblk0p1 12M 4.6M 6.5M 42% /media/cubieboard2 | ||
- | |||
- | </code> | ||
- | ===HDMI Audio=== | ||
- | <code> | ||
- | root@cubie:/# speaker-test -twav -c2 | ||
- | |||
- | speaker-test 1.0.25 | ||
- | |||
- | Playback device is default | ||
- | Stream parameters are 48000Hz, S16_LE, 2 channels | ||
- | WAV file(s) | ||
- | Rate set to 48000Hz (requested 48000Hz) | ||
- | Buffer size range from 4096 to 32768 | ||
- | Period size range from 1024 to 8192 | ||
- | Using max buffer size 32768 | ||
- | Periods = 4 | ||
- | was set period_size = 8192 | ||
- | was set buffer_size = 32768 | ||
- | 0 - Front Left | ||
- | 1 - Front Right | ||
- | </code> | ||
- | ===HP Audio=== | ||
- | Switch to HP output | ||
- | <code> | ||
- | $ vim.tiny /etc/asound.conf | ||
- | |||
- | pcm.!default { | ||
- | type hw | ||
- | card 0 //card0 is HP | ||
- | device 0 | ||
- | } | ||
- | ctl.!default { | ||
- | type hw | ||
- | card 0 //card0 is HP | ||
- | } | ||
- | </code> | ||
- | ===SSH=== | ||
- | <code> | ||
- | $ ssh cubie@192.168.1.110 | ||
- | aaron@cubietech:/work/$ ssh cubie@192.168.1.110 | ||
- | cubie@192.168.1.110's password: | ||
- | Linux cubie 3.4.79 #1 SMP PREEMPT Sat Aug 9 12:44:49 CST 2014 armv7l | ||
- | |||
- | The programs included with the Debian GNU/Linux system are free software; | ||
- | the exact distribution terms for each program are described in the | ||
- | individual files in /usr/share/doc/*/copyright. | ||
- | |||
- | Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | ||
- | permitted by applicable law. | ||
- | Last login: Tue Aug 5 23:11:24 2014 | ||
- | </code> | ||
- | ===DATA Card=== | ||
- | Green led show Data card(card1) activity | ||
- | ===SATA=== | ||
- | cb2-2cards support 2.5 inch HDD&3.5 inch HDD [[http://cubieboard.org/2013/09/24/how-to-support-3-5-inch-hdd-on-cubieboard/|3.5 inch HDD]] | ||
- | ===USBx2=== | ||
- | USB2.0x2 can support: | ||
- | * Both wireless and wire USB mouse/keyboard | ||
- | * USB host | ||
- | === OTG Device === | ||
- | Allwinner otg support device fuction ,Storage on board can mounted to pc | ||
- | * Mount boot card first Partition to PC(cubieez-2.0 default ) | ||
- | <code> | ||
- | $ sudo modprobe g_mass_storage file=/dev/mmcblk0p1 removable=yes stall=0 | ||
- | </code> | ||
- | * Mount data card to pc | ||
- | <code> | ||
- | $ sudo rmmod g_mass_storage | ||
- | $ modprobe g_mass_storage file=/dev/mmcblk1 removable=yes stall=0 | ||
- | </code> | ||
- | * Mount sata to pc | ||
- | <code> | ||
- | $ sudo rmmod g_mass_storage | ||
- | $ modprobe g_mass_storage file=/dev/sda removable=yes stall=0 | ||
- | </code> | ||
- | |||
- | ===IR Input=== | ||
- | IR module is sunxi-ir.ko | ||
- | <code> | ||
- | $ git clone https://bitbucket.org/emiliolopez/keybinder.git | ||
- | $ cd keybinder | ||
- | $ sudo make install | ||
- | </code> | ||
- | Taking a Infrared remote control for a test | ||
- | <code> | ||
- | $ sudo keybinder /dev/input/event0 | ||
- | cubie@cubie:~/keybinder$ sudo keybinder /dev/input/event0 | ||
- | Reading key input from /dev/input/event0 (sunxi-ir) | ||
- | Loaded config items | ||
- | Keycode 1 pressed | ||
- | Keycode 2 pressed | ||
- | Keycode 3 pressed | ||
- | </code> | ||
- | ===== Config ===== | ||
- | ==== cubie-config ==== | ||
- | "Ctrl+Alt+t" open a terminal,run "cubie-config" as root | ||
- | {{:tutorials:cb2-2cards:passwd.png?600|}} | ||
- | * Expand Filesystem,when first boot ,filesystem was expanded | ||
- | * Change User passwd | ||
- | * Enable Boot To Desktop Or Not | ||
- | * Host Name Changing | ||
- | * Eable SSH Or Not | ||
- | ===== Known bugs or limitations ===== | ||
- | * HDMI can't adapt to some monitor,this a display bug .please try: | ||
- | <code> | ||
- | $ sudo fbset -left 10 | ||
- | </code> | ||
- | * Line-in is not work due to hardware bug. | ||
<WRAP noprint> | <WRAP noprint> | ||
{{tag>Cubieboard Cubietruck}} | {{tag>Cubieboard Cubietruck}} | ||
</WRAP> | </WRAP> |