tutorials:common:begining_on_lubuntu
Differences
This shows you the differences between two versions of the page.
|
tutorials:common:begining_on_lubuntu [2014/06/11 14:23] allen [Headphone Jack] |
tutorials:common:begining_on_lubuntu [2014/07/12 12:19] (current) allen [Camera] |
||
|---|---|---|---|
| Line 214: | Line 214: | ||
| </code> | </code> | ||
| - | Modify the parameter according to the using HDMI displayer . | + | Modify the parameter according to the using HDMI displayer .For example ,''screen0_output_type = 3''set up HDMI output ,''screen0_output_type = 4''set up VGA output |
| You can get more information about display from [[http://linux-sunxi.org/Display |Display]] and modify script.bin from [[http://docs.cubieboard.org/tutorials/common/edit_the_system_configuration |edit_the_system_configuration ]] | You can get more information about display from [[http://linux-sunxi.org/Display |Display]] and modify script.bin from [[http://docs.cubieboard.org/tutorials/common/edit_the_system_configuration |edit_the_system_configuration ]] | ||
| ==== VGA ==== | ==== VGA ==== | ||
| Refer to HDMI section. | Refer to HDMI section. | ||
| + | Cubieboard1 and Cubieboard2 have no the VGA connector，but you can use [[http://docs.cubieboard.org/addons#cubie_breadboard|Cubie Breadboard]] to effect output. | ||
| ==== USB Host==== | ==== USB Host==== | ||
| Line 240: | Line 241: | ||
| The digital '0094' is keycode of the remote control . | The digital '0094' is keycode of the remote control . | ||
| - | + | The sunxi-3.4 IR is exposed as a a keyboard on the Linux input device interface. For example, the following simple keybinder application might be used to run arbitrary commands when receiving a specific keycode via IR. You can install it by | |
| + | <code> | ||
| + | $ git clone https://bitbucket.org/emiliolopez/keybinder.git | ||
| + | $ cd keybinder | ||
| + | $ sudo make install | ||
| + | </code> | ||
| + | Configuration is handled on /etc/keybinder.conf, as a "keycode,command" pair per line. The application prints every keycode received, so you may as well use it to figure out the keycodes you want to use. | ||
| + | |||
| + | To execute the application, run | ||
| + | <code> | ||
| + | $ sudo keybinder /dev/input/event0 | ||
| + | </code> | ||
| ==== Headphone Jack ==== | ==== Headphone Jack ==== | ||
| There are two audio devices HDMI and headphone in the cubieboard. | There are two audio devices HDMI and headphone in the cubieboard. | ||
| Line 274: | Line 286: | ||
| <code bash> | <code bash> | ||
| $sudo apt-get install espeak | $sudo apt-get install espeak | ||
| - | $espeak "hello" //say: hello | + | $espeak "hello" //say: hello |
| - | $espeak "hello_cubieboar" //say: hello cubieboard | + | $espeak "hello_cubieboard" //say: hello cubieboard |
| </code> | </code> | ||
| - | ==== Camera ==== | + | ==== USB Camera ==== |
| - | Most of the camera driver has integrated in the kernel，so it is available insert usb-camera into the cubieboard. | + | Most of the USB camera driver has integrated in the kernel，so it is available insert camera into the cubieboard. |
| $sudo apt-get install luvcview | $sudo apt-get install luvcview | ||
| $luvcview -s 1080x720 (can modify the resolution) | $luvcview -s 1080x720 (can modify the resolution) | ||
| | | ||
| + | If cubieboard has installed mplayer ,use mplyaer to display | ||
| + | <code> | ||
| + | |||
| + | $mplayer tv:// | ||
| + | |||
| + | </code> | ||
| ==== Micro SD ==== | ==== Micro SD ==== | ||
| TBD | TBD | ||
tutorials/common/begining_on_lubuntu.1402467804.txt.gz · Last modified: 2014/06/11 14:23 by allen
Page Tools
