Differences

This shows you the differences between two versions of the page.

--- tutorials:ct1:installation:cb3_lubuntu-12.10-desktop_nand_installation_v1.00 [2013/10/31 12:37]
benn [About Partitions]
+++ tutorials:ct1:installation:cb3_lubuntu-12.10-desktop_nand_installation_v1.00 [2014/05/04 11:22] (current)
allen [Download Images]
@@ Line 15: / Line 15: @@
 The Cubie team have ported cubietruck to lubuntu-12.10-desktop, here is a guide for installing lubuntu-12.10-desktop to cubietruck nandflash.
+<note tip>The latest version is v1.02 ([[http://dl.cubieboard.org/software/a20-cubietruck/lubuntu/ct-lubuntu-nand-v1.02/|download]]) </note>
@@ Line 23: / Line 25: @@
   gzip -d lubuntu-desktop-nand.img.gz
+<note tip>This firmware default HDMI output, for default VGA output please use this [[http://dl.cubieboard.org/software/a20-cubietruck/lubuntu/ct-lubuntu-nand-v1.00/VGA/|firmware]] \\ login/password:	linaro/linaro </note>
 ==== PhoenixSuit ====
 To flash the image to cubietruck board, you need to install phoenixsuit on your labtop. Please refer to the [[http://docs.cubieboard.org/tutorials/common/livesuit_installation_guide|Installation Guide]]
@@ Line 56: / Line 59: @@
 {{:tutorials:ct1:installation:livesuit-enter-fel-mode.png?700|LiveSuit GUI}}
-  - Press FEL key, and holding it
+  - Press FEL key and while holding it
-  - Plug in mini usb cable, and wait the following prombt
+  - Plug in mini usb cable, and wait the following prompt
   - Release FEL key
 {{:tutorials:ct1:installation:lubuntu-livesuit-3.png?700|LiveSuit GUI}}
+<note tip>Some USB Ports do not provide enough current for the board. If this happen, please plug in power adaptor before click 'Yes'</note>
 ==== Flash to Board ====
-When seeing the prombt, you have enter the FEL mode. Select Yes to continue
+When seeing the prompt, you have enter FEL mode. Select Yes to continue
 {{:tutorials:ct1:installation:lubuntu-livesuit-4.png?700|LiveSuit GUI}}
@@ Line 72: / Line 77: @@
 Congratulations! You have finished the installation process. Enjoy your Cubie and Lubuntu Desktop!
-When you first start up the system, It will take about 2 minutes to initialize the system. Also we suggest you have the ethernet cable connected when booting, to avoid waiting DHCP timeout.
+When you first start up the system, It will take about 2 minutes to initialize the system. Also we suggest you have the ethernet cable connected when booting, to avoid waiting for DHCP timeout.
@@ Line 152: / Line 157: @@
 rootfs
+====Wifi====
+  * Loading Module
+  #modprobe bcmdhd
+Hint: add "bcmdhd" at the end of file /etc/modules to activate WiFi during boot.
+  * Using Wifi
+e.g.
+  #iwlist scan
+  #iwconfig wlan0 essid "ssid" key xxxx
+  #iwconfig wlan0
+  #ifconfig wlan0 up
+  #dhclient wlan0
+Hint: iwconfig key does not support password phrase. One has to generate xxxx.
+Hint: it is easier to use wpa_supplicant for wifi configuration with WPA2 and password phrase.

CubieBoard Docs

User Tools

Site Tools

Differences

Page Tools