User Tools

Site Tools


tutorials:ct1:installation:cb3_lubuntu-12.10-desktop_nand_installation_v1.00

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tutorials:ct1:installation:cb3_lubuntu-12.10-desktop_nand_installation_v1.00 [2013/11/10 21:44]
75.115.239.41 [Enter FEL Mode]
tutorials:ct1:installation:cb3_lubuntu-12.10-desktop_nand_installation_v1.00 [2014/05/04 11:22] (current)
allen [Download Images]
Line 15: Line 15:
  
 The Cubie team have ported cubietruck to lubuntu-12.10-desktop,​ here is a guide for installing lubuntu-12.10-desktop to cubietruck nandflash. The Cubie team have ported cubietruck to lubuntu-12.10-desktop,​ here is a guide for installing lubuntu-12.10-desktop to cubietruck nandflash.
 +
 +<note tip>The latest version is v1.02 ([[http://​dl.cubieboard.org/​software/​a20-cubietruck/​lubuntu/​ct-lubuntu-nand-v1.02/​|download]]) </​note>​
  
  
Line 23: Line 25:
   gzip -d lubuntu-desktop-nand.img.gz   gzip -d lubuntu-desktop-nand.img.gz
  
 +<note tip>This firmware default HDMI output, for default VGA output please use this [[http://​dl.cubieboard.org/​software/​a20-cubietruck/​lubuntu/​ct-lubuntu-nand-v1.00/​VGA/​|firmware]] \\ login/​password:​ linaro/​linaro </​note>​
 ==== PhoenixSuit ==== ==== PhoenixSuit ====
 To flash the image to cubietruck board, you need to install phoenixsuit on your labtop. Please refer to the [[http://​docs.cubieboard.org/​tutorials/​common/​livesuit_installation_guide|Installation Guide]] To flash the image to cubietruck board, you need to install phoenixsuit on your labtop. Please refer to the [[http://​docs.cubieboard.org/​tutorials/​common/​livesuit_installation_guide|Installation Guide]]
Line 61: Line 64:
  
 {{:​tutorials:​ct1:​installation:​lubuntu-livesuit-3.png?​700|LiveSuit GUI}} {{:​tutorials:​ct1:​installation:​lubuntu-livesuit-3.png?​700|LiveSuit GUI}}
 +
 +<note tip>Some USB Ports do not provide enough current for the board. If this happen, please plug in power adaptor before click '​Yes'</​note>​
  
 ==== Flash to Board ==== ==== Flash to Board ====
  
-When seeing the prombt, you have enter the FEL mode. Select Yes to continue+When seeing the prompt, you have enter FEL mode. Select Yes to continue
  
 {{:​tutorials:​ct1:​installation:​lubuntu-livesuit-4.png?​700|LiveSuit GUI}} {{:​tutorials:​ct1:​installation:​lubuntu-livesuit-4.png?​700|LiveSuit GUI}}
Line 72: Line 77:
 Congratulations! You have finished the installation process. Enjoy your Cubie and Lubuntu Desktop! Congratulations! You have finished the installation process. Enjoy your Cubie and Lubuntu Desktop!
  
-When you first start up the system, It will take about 2 minutes to initialize the system. Also we suggest you have the ethernet cable connected when booting, to avoid waiting DHCP timeout.+When you first start up the system, It will take about 2 minutes to initialize the system. Also we suggest you have the ethernet cable connected when booting, to avoid waiting ​for DHCP timeout.
  
  
Line 156: Line 161:
  
   #modprobe bcmdhd   #modprobe bcmdhd
 +  ​
 +Hint: add "​bcmdhd"​ at the end of file /​etc/​modules to activate WiFi during boot.
  
   * Using Wifi   * Using Wifi
  
-  ​e.g.+e.g.
  
   #iwlist scan   #iwlist scan
Line 166: Line 173:
   #ifconfig wlan0 up   #ifconfig wlan0 up
   #dhclient wlan0   #dhclient wlan0
 +Hint: iwconfig key does not support password phrase. One has to generate xxxx.
  
- +Hint: it is easier to use wpa_supplicant for wifi configuration with WPA2 and password phrase.
-   +
- +
  
  
tutorials/ct1/installation/cb3_lubuntu-12.10-desktop_nand_installation_v1.00.1384091066.txt.gz · Last modified: 2013/12/23 14:50 (external edit)