Translations of this page:
This is an old revision of the document!
About this Article
This guide shows you how to install Lubuntu Desktop/Server's rootfs from nandflash to the hard drive. We can get +100MB/s R/W from Cubie1/2/3 SATA port now. Installing the rootfs to SSD hard drive, makes the Cubietruck really like a Linux PC. This guide only works for ct-lubutnu-desktop/server v1.00 or later.
Please refer to http://docs.cubieboard.org/tutorials/ct1/installation/cb3_lubuntu-12.10-desktop_nand_installation_v1.00
We assume that, /dev/sda is the hard drive we want to install
$sudo su - root #dd if=/dev/nandb of=/dev/sda1 bs=1M
$sudo su - root #mount /dev/nanda /mnt #vi /mnt/uEnv.txt
Change to content of uEnv.txt to
root@cubietruck:~# cat /mnt/uEnv.txt console=tty0 extraargs=console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard nand_root=/dev/sda1
#sync #umount /mnt #reboot