tutorials:ct1:installation:moving_rootfs_from_nandflash_to_hard_drive
Differences
This shows you the differences between two versions of the page.
|
tutorials:ct1:installation:moving_rootfs_from_nandflash_to_hard_drive [2013/11/16 19:15] 91.58.230.27 [Copying Rootfs] |
tutorials:ct1:installation:moving_rootfs_from_nandflash_to_hard_drive [2013/12/23 14:50] (current) |
||
|---|---|---|---|
| Line 21: | Line 21: | ||
| ==== Prepeare the drive for rootfs ==== | ==== Prepeare the drive for rootfs ==== | ||
| + | The drive must have a primary partition (for example with 10 GByte) formated with filesystem "ext4". You can use the Linaro user interface DISK app, gparted or use the following shell commands | ||
| list all available drives | list all available drives | ||
| #fdisk -l | #fdisk -l | ||
| - | Choose the drive you want to make changes to (e.g. sdc): | + | Choose the drive you want to make changes to (e.g. sda): |
| - | #fdisk /dev/sdc | + | #fdisk /dev/sda |
| | | ||
| + | use "p" (print partition of a drive), "d" delete a partition or "n" (create new partition). The partition should be of type "83" | ||
| + | |||
| + | Format the partition for rootfs with EXT4 filesystem | ||
| + | #mkfs.ext4 /dev/sda1 | ||
| ==== Copying Rootfs ==== | ==== Copying Rootfs ==== | ||
tutorials/ct1/installation/moving_rootfs_from_nandflash_to_hard_drive.1384600505.txt.gz · Last modified: 2013/12/23 14:50 (external edit)
Page Tools
