This shows you the differences between two versions of the page.
tutorials:ct1:installation:moving_rootfs_from_nandflash_to_hard_drive [2013/11/17 01:52] 91.58.230.27 [Prepeare the drive for rootfs] |
tutorials:ct1:installation:moving_rootfs_from_nandflash_to_hard_drive [2013/12/23 14:50] (current) |
||
---|---|---|---|
Line 21: | Line 21: | ||
==== Prepeare the drive for rootfs ==== | ==== Prepeare the drive for rootfs ==== | ||
- | Th drive must have a primary partition (for example with 10 GByte) formated with filesystem "ext4". You can use the Linaro user interface DISK app, gparted or use the following shell commands | + | The drive must have a primary partition (for example with 10 GByte) formated with filesystem "ext4". You can use the Linaro user interface DISK app, gparted or use the following shell commands |
list all available drives | list all available drives | ||
Line 29: | Line 29: | ||
#fdisk /dev/sda | #fdisk /dev/sda | ||
| | ||
- | use "p" (print partition of a drive), "d" deletea partition or "n" (create new partition). The partition should be of type "83" | + | use "p" (print partition of a drive), "d" delete a partition or "n" (create new partition). The partition should be of type "83" |
| | ||
Format the partition for rootfs with EXT4 filesystem | Format the partition for rootfs with EXT4 filesystem |