This shows you the differences between two versions of the page.
tutorials:dvk521:documentations:a20:driver_porting_and_configuration [2013/12/10 16:58] waveshare |
tutorials:dvk521:documentations:a20:driver_porting_and_configuration [2014/03/13 14:44] (current) waveshare |
||
---|---|---|---|
Line 3: | Line 3: | ||
The I/O control driver is built as a module, can be used for controlling common peripherals, such as LED, push button, buzzer. | The I/O control driver is built as a module, can be used for controlling common peripherals, such as LED, push button, buzzer. | ||
- | Copy [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/A20/Driver%20and%20API/driver/|io_control_dev]] to your ubuntu system, compile it with your own system setting (refer to Appendix 1 "Compiling Driver Module"), and copy the generated io_control.ko file to the board, use the following command to load the driver module: | + | Copy [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/a20-cubieboard-dvk/Driver%20and%20API/driver/|io_control_dev]] to your ubuntu system, compile it with your own system setting (refer to Appendix 1 "Compiling Driver Module"), and copy the generated io_control.ko file to the board, use the following command to load the driver module: |
$insmod io_control.ko | $insmod io_control.ko | ||
Now you can start to try the I/O control API demo (refer to Appendix 2 "Running API Demo"). | Now you can start to try the I/O control API demo (refer to Appendix 2 "Running API Demo"). | ||
Line 41: | Line 41: | ||
Reboot the system, insert the DS18B20 device. | Reboot the system, insert the DS18B20 device. | ||
- | Copy [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/A20/Driver%20and%20API/driver/|ds18b20_dev]] to your ubuntu system, compile it with your own system setting (refer to Appendix 1 "Compiling Driver Module"), and copy the generated w1-sun4i.ko file to the board, use the following command to load the driver: | + | Copy [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/a20-cubieboard-dvk/Driver%20and%20API/driver/|ds18b20_dev]] to your ubuntu system, compile it with your own system setting (refer to Appendix 1 "Compiling Driver Module"), and copy the generated w1-sun4i.ko file to the board, use the following command to load the driver: |
$insmod w1-sun4i.ko | $insmod w1-sun4i.ko | ||
Line 75: | Line 75: | ||
twi1_scl = port:PB18<2><default><default><default> | twi1_scl = port:PB18<2><default><default><default> | ||
twi1_sda = port:PB19<2><default><default><default> | twi1_sda = port:PB19<2><default><default><default> | ||
- | Then convert it into script.bin format by using fex2bin, and replace the earlier script.bin on the board. (for more info, refer to the document [[tutorials:DVK521:Documentations:A10:Prepare for Kernel and Drivers Porting|Prepare for Kernel and Drivers Porting]] | + | Then convert it into script.bin format by using fex2bin, and replace the earlier script.bin on the board. (for more info, refer to the document [[tutorials:DVK521:Documentations:A20:Prepare for Kernel and Drivers Porting|Prepare for Kernel and Drivers Porting]] |
Reboot the system. | Reboot the system. | ||
Line 293: | Line 293: | ||
=== Config the script.fex === | === Config the script.fex === | ||
Since the touch screen is connected to I2C1 controller, make sure the I2C driver has been ported (refer to the previous section "Porting I2C Bus Driver"). | Since the touch screen is connected to I2C1 controller, make sure the I2C driver has been ported (refer to the previous section "Porting I2C Bus Driver"). | ||
- | Config the [ctp_para] setting in script.fex. | + | Config the [ctp_para],[ctp_list_para],and[gpio_para] setting in script.fex. |
ctp_name:driver name | ctp_name:driver name | ||
ctp_twi_id:I2C controller which is actually used | ctp_twi_id:I2C controller which is actually used | ||
Line 319: | Line 319: | ||
ctp_firm = 1 | ctp_firm = 1 | ||
ctp_wakeup = port:PB13<1><default><default><1> | ctp_wakeup = port:PB13<1><default><default><1> | ||
+ | | ||
+ | [ctp_list_para] | ||
+ | ctp_det_used = 1 | ||
+ | ft5x_ts = 1 | ||
+ | gt82x = 0 | ||
+ | gslX680 = 0 | ||
+ | gt9xx_ts = 0 | ||
+ | gt811 = 0 | ||
| | ||
[gpio_para] | [gpio_para] | ||
Line 564: | Line 572: | ||
==== Appendix 1: Compiling Driver Module ==== | ==== Appendix 1: Compiling Driver Module ==== | ||
- | The provided xx.ko files under [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/A20/Driver%20and%20API/driver/|Driver]] is compiled to run on our system image only. | + | The provided xx.ko files under [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/a20-cubieboard-dvk/Driver%20and%20API/driver/|Driver]] is compiled to run on our system image only. |
If the drivers are going to being loaded on your own system, they need to be re-compiled according to you system kernel path. | If the drivers are going to being loaded on your own system, they need to be re-compiled according to you system kernel path. | ||
Line 570: | Line 578: | ||
Use the io_control_dev.ko for demonstration. | Use the io_control_dev.ko for demonstration. | ||
- | 1.1 Copy the [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/A20/Driver%20and%20API/driver/|io_control_dev]] to ubuntu, assume the target directory is /home/waveshare/cubieboard2/waveshare_demo/driver . | + | 1.1 Copy the [[http://dl.cubieboard.org/parteners/waveshare/Source_Code/a20-cubieboard-dvk/Driver%20and%20API/driver/|io_control_dev]] to ubuntu, assume the target directory is /home/waveshare/cubieboard2/waveshare_demo/driver . |
Modify the files permission: | Modify the files permission: | ||
#cd /home/waveshare/cubieboard2/waveshare_demo/driver/io_control_dev | #cd /home/waveshare/cubieboard2/waveshare_demo/driver/io_control_dev |