User Tools

Site Tools


tutorials:dvk521:documentations:writing_linaro_system_into_sd_card

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tutorials:dvk521:documentations:writing_linaro_system_into_sd_card [2013/11/21 11:54]
waveshare created
tutorials:dvk521:documentations:writing_linaro_system_into_sd_card [2013/12/23 14:50] (current)
Line 1: Line 1:
-====== Writing Linaro System ​Into Sd Card ======+====== Writing Linaro System ​into SD Card ====== 
 +Note: 
 +linaro-precise-alip-201204 is used for demonstration. After the system was written into SD card, the default Linux kernel version is 3.0. We'll upgrade it to 3.4.61 later on the Linux kernel porting section.
  
-<WRAP noprint><​WRAP left box 60%> +===== Format the SD Card ===== 
-//__About this Article__//​ +format the SD card by using [[http://dl.cubieboard.org/parteners/waveshare/​Software/HPUSBDisk.exe|HPUSBDisk.exe]]
-  * **Author**: waveshare --- waveshare@waveshare.net --- 2013/11/21 11:54 +
-  * **Copyrights**: ​[[http://creativecommons.org/licenses/by-sa/3.0/|CC Attribution-Share Alike 3.0 Unported]] +
-  * **Contributors**:​ [[http://​cubieboard.org/​|Cubieboard Community]] : ... +
-</​WRAP></​WRAP>​+
  
-===== Abstract ​=====+===== Writing Linaro System into SD Card ===== 
 +1. Insert the SD card to your computer, it will be detected and mounted under the /media/ directory. Enter the following command on the terminal to unmount all the devices: 
 +  # sudo umount ​ /​media/​*  ​
  
 +2. Find out the SD card device name on your system, say, sdc or sdc1. We assume that the device name is sdc here. 
 +    ​
 +3. 
  
-===== Headline =====+Option 1:
  
-==== Headline ====+Copy the [[http://​dl.cubieboard.org/​parteners/​waveshare/​Source_Code/​|sunxi-bsp]] to ubuntu system. Enter the sunxi-bsp folder, use the following commnad: 
 +  #chmod 777 *   
 +  #chmod 777 scripts/​* ​  
 +  #sudo  ./​scripts/​sunxi-media-create.sh ​ /dev/sdc cubieboard_hwpack.tar.xz linaro-precise-alip-20120426-84.tar.gz ​  
 +Option 2: 
 + 
 +Download the source from the web, use the following command on ubuntu system: 
 +  #sudo git clone https://​github.com/​linux-sunxi/​sunxi-bsp/ ​  
 +  #sudo cd sunxi-bsp ​  
 +  #sudo wget http://​dl.linux-sunxi.org/​amery/​sunxi-3.0/​latest/​cubieboard_hwpack.tar.xz ​  
 +  #sudo wget http://​releases.linaro.org/​12.04/​ubuntu/​precise-images/​alip/​linaro-precise-alip-20120426-84.tar.gz  
 +  #sudo  ./​scripts/​sunxi-media-create.sh ​ /dev/sdc cubieboard_hwpack.tar.xz linaro-precise-alip-20120426-84.tar.gz 
 + 
 + 
 +4. When completed, insert the SD card into Cubieboard, power up the board to boot Linaro system. On the first startup, the video output is HDMI-to-VGA output, or serial port output. You can connect the Cubieboard to the monitor through an HDMI-to-VGA convertor, or use the [[http://​dl.cubieboard.org/​parteners/​waveshare/​Software/​ultra-serial-port-monitor.exe|serial port monitor]] to display the Cubieboard system terminal. ​
  
  
-===== Headline ===== 
  
-=== See Also === 
  
 <WRAP noprint> <WRAP noprint>
 {{tag>​Cubieboard Cubietruck}} {{tag>​Cubieboard Cubietruck}}
 </​WRAP>​ </​WRAP>​
tutorials/dvk521/documentations/writing_linaro_system_into_sd_card.1385006060.txt.gz · Last modified: 2013/12/23 14:50 (external edit)