This shows you the differences between two versions of the page.
tutorials:dvk521:documentations:writing_linaro_system_into_sd_card [2013/11/21 15:30] waveshare |
tutorials:dvk521:documentations:writing_linaro_system_into_sd_card [2013/12/23 14:50] (current) |
||
---|---|---|---|
Line 28: | Line 28: | ||
#sudo wget http://releases.linaro.org/12.04/ubuntu/precise-images/alip/linaro-precise-alip-20120426-84.tar.gz | #sudo wget http://releases.linaro.org/12.04/ubuntu/precise-images/alip/linaro-precise-alip-20120426-84.tar.gz | ||
#sudo ./scripts/sunxi-media-create.sh /dev/sdc cubieboard_hwpack.tar.xz linaro-precise-alip-20120426-84.tar.gz | #sudo ./scripts/sunxi-media-create.sh /dev/sdc cubieboard_hwpack.tar.xz linaro-precise-alip-20120426-84.tar.gz | ||
+ | |||
4. When completed, insert the SD card into Cubieboard, power up the board to boot Linaro system. On the first startup, the video output is HDMI-to-VGA output, or serial port output. You can connect the Cubieboard to the monitor through an HDMI-to-VGA convertor, or use the [[http://dl.cubieboard.org/parteners/waveshare/Software/ultra-serial-port-monitor.exe|serial port monitor]] to display the Cubieboard system terminal. | 4. When completed, insert the SD card into Cubieboard, power up the board to boot Linaro system. On the first startup, the video output is HDMI-to-VGA output, or serial port output. You can connect the Cubieboard to the monitor through an HDMI-to-VGA convertor, or use the [[http://dl.cubieboard.org/parteners/waveshare/Software/ultra-serial-port-monitor.exe|serial port monitor]] to display the Cubieboard system terminal. |