Add 2.54mm pitch 96 pins male-connector, for ease of breakout all the extended funcions pins in this baseboard
Offering 1312 isolated cell-vias with size of 1.1mm/1.8mm and 2.54mm pitch, for ease of doing circuitry DIY experiment
MicroSD Breakout
For exporting UART and JTAG pins of Cubieboard
Cubie Black & White Acrylic Case
(1) Totally enclosed, Dust-proof
(2) Convenient to access SATA and 96 extended pins even with this case.
Cubie Simple Acrylic Case
Suitable for developers, convenient to access all the interfaces of cubieboard.
Transparent Case for Cubieboard
The same with Black&White Case, but the color is different
TTL to USB serial cable
2 in 1 heatsink package
Clean up the surface of the main chip, make sure not to have greasy dirt
Coat with a thin layer of thermal silicone on the surface,recommended thickness is 0.1~0.5mm,the thinner the better
Attach the metal block, press slightly, adjust the position of the main chip, do not move within 10 minutes. Warning: This silicone adhesive force is large, not easy to remove after dry