Translations of this page:
This is an old revision of the document!
TBD
| Cubieboard 1 | Cubieboard 2 | Cubietruck(Cubieboard 3) | |
|---|---|---|---|
| CPU | Cortex-A8 1GHz | dual core Cortex-A7 (912MHz each) | dual core Cortex-A7 (912MHz each) |
| RAM | 1 GB | 1 GB | 2 GB |
| Storage | 4 GB onboard + expandable sdcard upto 32GB | 4 GB onboard + expandable sdcard upto 32GB | 8 GB onboard + expandable sdcard upto 32GB |
| VGA | No (Available via baseboard/hdmi-vga convertor) | No (Available via baseboard/hdmi-vga convertor) | Yes |
| Wifi+blutooth | No | No | Yes |
| Ethernet | 100 Mbps | 100 Mbps | 1 Gbps |
| RTC | No | No | Yes |
| Android | ICS 4.0.4 | 4.2.2 Jelly Bean | 4.2.2 Jelly Bean |
If you're not going to specify a block size with dd, you can simply redirect from/to /dev/sdX:
gzip < /dev/sdX > bkp.img.gz gunzip < bkp.img.gz > /dev/sdX
you may use GPARTED to make it, but you may use other PC to help you, you can check http://gparted.sourceforge.net/ for more information. Also you can try to use the resize2fs command, e.g.
#resize2fs /dev/mmcblk0p2
http://dl.cubieboard.org/software/a20-cubietruck/common/
TBD
This gap was designed for HDD(Hard disk) adding.
| COLOR | MEANING | DESC | |
|---|---|---|---|
| 1 | blue | heatbet | running |
| 2 | orange | cpu0 | cpu0 load |
| 3 | white | cpu1 | cpu1 load |
| 4 | green | mmc0 | mmc0 load |
TBD
TBD
TBD
exported via sysfs
Of course yes.
TBD