User Tools

Site Tools


products:start

This is an old revision of the document!


Cubieboard Open-Source Main-Boards

Cubieboard1

Cubieboard1 is a small (10x6cm), hacker friendly, extendable, very low-cost, and powerful ARM board with Allwinner A10 SoC. It features a 1 GHz ARM Cortex A8 CPU, with 1GB of DDR3 RAM, a very powerful Video Encoding/Decoding VPU, a Mali400 OpenGL ES GPU, and 96 expansion headers which can be used as GPIO, I2C, UART, LVDS, PWM, SPI, CSI, and so on.

a10-cubieboard

Hardware Specs

  1. AllWinnerTech SOC A10,ARM® Cortex™-A8 ARM® Mali400 MP1 Complies with OpenGL ES 2.0/1.1
  2. 1GB DDR3 @480MHz
  3. 4GB internal NAND flash, up to 32GB on SD slot, up to 2T on 2.5 SATA disk
  4. 5VDC input 2A or USB otg input
  5. 1x 10/100 ethernet, support usb wifi
  6. 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd
  7. 1x HDMI 1080P display output
  8. 1x IR, 1x line in, 1x line out
  9. 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more

Expansion Ports

Cubieboard2

After about half year of cubieboard1's born, cubietech brought an another board, cubieboard2 to the cubie fans, which is totally compatible with cubieboard1. It share the same PCB with cubieboard1, but with a dual core CPU and a dual core MALI400 GPU.

cubieboard2

Hardware Specs

  1. AllWinnerTech SOC A20,ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
  2. 1GB DDR3 @480M
  3. 3.4GB internal NAND flash, up to 32GB on SD slot, up to 2T on 2.5 SATA disk
  4. 5VDC input 2A or USB otg input
  5. 1x 10/100 ethernet, support usb wifi
  6. 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd
  7. 1x HDMI 1080P display output
  8. 1x IR, 1x line in, 1x line out
  9. 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more

Expansion Ports

Cubieboard2 Dual-Card Version

Cubieboard2 Dual-Card Version which named Cb2-2card for short is also a open-source hardware and shares the same PCB with cubieboard2. It has all the features like cubieboard2 except the on-board 4GB NAND Flash. But Cubieboard2 Dual-Card Version has 2 TF card slots and it supports more flexible storage media configuration. This board has lower costs and very suit for geeks and hobbyists.

Hardware Specs

  1. AllWinnerTech SOC A20,ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
  2. 1GB DDR3 @480M
  3. Dual TF card slot, up to 32GB on SD slot, up to 2T on 2.5 SATA disk
  4. 5VDC input 2A or USB otg input
  5. 1x 10/100 ethernet, support usb wifi
  6. 2x USB 2.0 HOST, 1x mini USB 2.0 OTG, 1x micro sd
  7. 1x HDMI 1080P display output
  8. 1x IR, 1x line in, 1x line out
  9. 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more

For more software information, please refer to here: http://docs.cubieboard.org/tutorials/cb2

Cubietruck(Cubieboard3)

While cubieboard1/2 very suitable for student, software/hardware hackers, cubietruck(cubieboard3) is suitable for us to make real product.

cubietruck

Cubietruck is the 3rd board of Cubieteam, so we also name it Cubieboard3. It's a new PCB model adopted with Allwinner A20 main chip,just like Cubieboard2. But it is enhanced with some features, such as 2GB memory, VGA display interface on-board, 1000M nic, WIFI+BT on-board, support Li-battery and RTC,SPDIF audio interface.

Hardware Specs

  1. AllWinnerTech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
  2. 1GB/2GB DDR3@480MHz
  3. HDMI&VGA 1080P display output on-board
  4. 10M/100M/1G Ethernet
  5. Wifi+BT wireless connection with antenna on-board
  6. SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input)
  7. Storage solution NAND+MicroSD or TSD+ MicroSD or 2*MicroSD
  8. 2 x USB HOST 1 x OTG 1 x SPDIF 1 x IR 4 x LEDs 1 Headphone 3 x Keys
  9. Power DC5V @ 2.5A with HDD support Li-battery & RTC
  10. 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWMx2, TS/CSI, IRDA, LINEIN&FMIN, TVINx4 with 2.0 pitch connectors
  11. PCB size 11cm *8cm*1.4mm very suitable for installing a 2.5’ HDD

Expansion Ports

Cubieboard4(CC-A80)

Cubieboard4

products/start.1423560236.txt.gz · Last modified: 2015/02/10 17:23 by aaron