This is an old revision of the document!

A20-cubieboard Lubuntu Desktop Releases

About this Article

v1.02

Download	Features	Issues	Note
Img	Suport Livesuit on Windows(Fixed at firmware)	1. Do not support Linux Livesuit 2. X windows does not display correctly	login/password: linaro/linaro
	Default HDMI output
	Linux-3.3 Kernel

Download	Features	Issues	Note
Img(HDMI)	Suport Livesuit on linux	Do not support Windows Livesuit	login/password: linaro/linaro
Img(VGA)	Support HDMI/VGA output	Do not support Windows Livesuit	login/password: linaro/linaro

Download	Features	Issues
Img	Linux 3.4 kernel	1.Take a long time to boot when no wired net cable Wait DHCP timeout 2. MALI GPU not support till now 3. VE not support till now 4. Cannot switch to VGA output automatically 5. First time boot take about 2 minutes to setup 6. First time boot take about 2 minutes to setup 7. Early A20 chip have no CHIPID, the new will have chipid that can be used as MAC address
	Default HDMI output
	Preinstall openssh-server/openssh-client
	Preinstall fbset
	Preinstall GPIO python library
	Preinstall Chinese font
	TL8188EU/RTL8192CU wifi have been tested
	Enable DHCP eth0
	DRAM 480MHz
	Support Linux/Windows Livesuit(MAC Tested: Works)

Download	Features	Issues	Note
Img	Based on v1.04-beta1	MALI GPU not support till now	login/password: linaro/linaro
Kernel	Add jdk-1.8 armhf	VE not support till now
	with many USB camera drivers builtin	Cannot auto switch to VGA output
	Support PWM	First time boot take about 2 minutes to setup
	fex2bin/bin2fex tools and cb-display-tool	Take a long time to boot when no wired net cable Wait DHCP timeout

To use pwm:

$ cd /lib/modules/`uname -r`/kernel/drivers/misc
$ sudo insmod pwm-sunxi.ko
$ sudo su - root
# cd /sys/kernel/sunxi_pwm
# echo '0 1200 2400' > start

To use cb-display-tool:

# To switch VGA/HDMI display mode in command line. e.g.
$ cb-display-tool -o 8 -m 11
# Note: can switch to the same resolutions only currently.

Download	Features	Issues	Note
Img.gz	Enable MALI GPU	2D, Video Encoding/Decoding	login/password: linaro/linaro
Kernelsource	Enable many kernel modules that users want	SPI doesn't work	login/password: linaro/linaro

Download	Features	Issues	Note
Img	1.Enable Cedarx 2.Put uImage, uEnv.txt to first nand partition, so we can change kernel, parameters more easily 3.Reduce nand partitions from 5 to 3	1. SPI driver doesn't work currently	login/password: linaro/linaro


Kernel

For SD Card Installation, please refer to here