User Tools

Site Tools


tutorials:ct1:installation:cb3_a20-install_nand_boot_android_for_cubietruck

This is an old revision of the document!


Cb3 A20-install Nand Boot Android For Cubietruck

About this Article

Install Livesuit or PhoenixSuit

All sunxi devices use LiveSuit as a default flasher and updater for retail customer and PhoenixCard or PhoenixUSB for flashing when devices are manufactured. LiveSuit/Phoenix protocol and data are closed-source standrad used by many companies and devices.

Please note that PhoenixSuit is actually LiveSuit2.0. There are different platform's PhoenixSuit

  1. Windows
  2. Linux i386
  3. Linux x86_64
  4. Mac

Please refer to the Livesuit/PhoenixSuit Installation Guide

Download Image

Assuming you are going to use ct-nand-v1.00-20130911.img

 $wget http://dl.cubieboard.org/software/a20-cubietruck/android/ct-nand-v1.00-20130911.img.gz
 

For more Livesuit Images, please refer to http://dl.cubieboard.org If you want to know more about what is a LiveSuit Image, please refer to http://linux-sunxi.org/LiveSuite_images

(We just have only one image for cubietruck,later we will have more image)

Run Livesuit

Run Livesuit

select the image

Press the FEL key when power up(the FEL key is the one under the USB OTG port), The CPU automatically enters FEL mode. Livesuit will start to write the image to Nand on board.

Press "Yes":

Installing:

Install Success:

tutorials/ct1/installation/cb3_a20-install_nand_boot_android_for_cubietruck.1387781419.txt.gz · Last modified: 2014/01/10 00:12 (external edit)