Translations of this page:
This is an old revision of the document!
About this Article
Here is the guide to show that how to use python program control GPIOs .More others way to control can refer to http://docs.cubieboard.org/tutorials/common/gpio_on_lubuntu
$sudo apt-get update $sudo apt-get install python-dev $wget http://dl.linux-sunxi.org/users/tom/pySUNXI-0.1.12.tar.gz $tar zxf pySUNXI-0.1.12.tar.gz $sudo python setup.py install
#!/usr/bin/env python import SUNXI_GPIO as GPIO import time RED_LED = GPIO.PD0 GPIO.init() GPIO.setcfg(RED_LED, GPIO.OUT) while True: GPIO.output(RED_LED, GPIO.HIGH) time.sleep(1) GPIO.output(RED_LED, GPIO.LOW) time.sleep(1)
$chmod +x blink.py $sudo ./blink.py
The red led is blinking in cycle time.